Filament data from manufacturer data sheets

This table collects what filament makers publish about their own products: recommended nozzle and bed temperatures, density, drying conditions, heat deflection temperature (HDT) and, where stated, a maximum volumetric speed. Every row links to the technical data sheet or official product page it was copied from. If a maker does not publish a value, the cell says not published; nothing is estimated or filled in from other brands.

The database holds 115 products from 9 brands (Bambu Lab, Elegoo, eSUN, Hatchbox, Overture, Polymaker, Prusament, Siraya Tech, Sunlu), backed by 134 source documents. Density is published for104 of them, drying conditions for 90, HDT for78 and a maximum volumetric speed for 12.

Two cautions. Data sheets measure properties on test bars under a named standard (for example ISO 75 for HDT, at 0.45 or 1.8 MPa load), so compare like with like: the table shows the load next to each HDT value. And a printing range is the maker's recommendation for their own formulation; it is a starting point for atemperature tower, not a guarantee.

Comparison charts

Filament density chart: g/cm³ by material and brand, and why it matters
Published densities for PLA, PETG, ABS, ASA, TPU, nylon, PC and filled filaments, the test standards behind them, and how density changes metres per spool.
Filament drying chart: temperatures and times from each manufacturer
Drying temperature and time for PLA, PETG, ABS, ASA, TPU, nylon, PC and support filaments, copied from manufacturer data sheets and drying guides.
Filament heat resistance: HDT and Vicat values from manufacturer data sheets
Heat deflection (HDT) at 0.45 and 1.8 MPa and Vicat softening temperatures for PLA, PETG, ABS, ASA, PC, nylon and filled filaments, with how to compare them.
Filament temperature chart: nozzle and bed ranges as each maker publishes them
Nozzle and bed temperatures for PLA, PETG, ABS, ASA, TPU, nylon and PC from manufacturer data sheets, with what the ranges mean and how to pick a value.
Max volumetric speed by filament: the few flow limits makers publish
Which filament makers publish a maximum volumetric speed (mm³/s), under what hotend and temperature, and how to turn it into a print speed for your printer.

All products

Filter by material or brand, search by name, or click a column heading to sort. Drying shows temperature and time; HDT shows the test load. Numbers in the last column point to the sources below.

									Source
Bambu Lab	PLA Basic	PLA	190–230	35–45	1.24	50 °C, 8 h	57 °C @ 0.45 MPa 54 °C @ 1.8 MPa	24	^{[1, 2]}
Bambu Lab	PLA Matte	PLA	190–230	35–45	1.31	50 °C, 8 h	58 °C @ 0.45 MPa 52 °C @ 1.8 MPa	28	^{[2, 3]}
Bambu Lab	PLA Silk+	PLA	210–240	35–45	1.27	55 °C, 8 h	60 °C @ 0.45 MPa 56 °C @ 1.8 MPa	not published	^[4]
Bambu Lab	PLA Tough+	PLA	220–250	35–65	1.21	55 °C, 8 h	61 °C @ 0.45 MPa 58 °C @ 1.8 MPa	not published	^[5]
Bambu Lab	PLA-CF	PLA-CF	210–240	35–45	1.22	55 °C, 8 h	55 °C @ 0.45 MPa 54 °C @ 1.8 MPa	not published	^[6]
Bambu Lab	PETG Basic	PETG	230–260	65–75	1.25	65 °C, 8 h	71 °C @ 0.45 MPa 68 °C @ 1.8 MPa	not published	^[7]
Bambu Lab	PETG HF	PETG	230–260	65–75	1.28	65 °C, 8 h	69 °C @ 0.45 MPa 62 °C @ 1.8 MPa	24	^{[2, 8]}
Bambu Lab	PETG-CF	PETG-CF	240–270	65–75	1.25	65 °C, 8 h	74 °C @ 0.45 MPa 68 °C @ 1.8 MPa	not published	^[9]
Bambu Lab	ABS	ABS	240–270	80–100	1.05	80 °C, 8 h	87 °C @ 0.45 MPa 84 °C @ 1.8 MPa	not published	^[10]
Bambu Lab	ASA	ASA	240–270	80–100	1.05	80 °C, 8 h	100 °C @ 0.45 MPa 92 °C @ 1.8 MPa	not published	^[11]
Bambu Lab	TPU 95A HF	TPU	220–240	30–35	1.22	70 °C, 8 h	not published	12	^{[12, 13]}
Bambu Lab	PAHT-CF	PA-CF	260–290	80–100	1.06	80 °C, 8–12 h	194 °C @ 0.45 MPa 170 °C @ 1.8 MPa	not published	^[14]
Bambu Lab	PC	PC	260–280	90–110	1.20	80 °C, 8 h	112 °C @ 0.45 MPa 117 °C @ 1.8 MPa	not published	^[15]
Bambu Lab	Support for PLA/PETG	PLA	190–240	35–60	1.28	75 °C, 8 h	not published	not published	^[16]
Bambu Lab	PVA	PVA	220–250	35–45	1.27	80 °C, 8–12 h	not published	not published	^[17]
Elegoo	PLA	PLA	190–230	35–65	1.26	45–55 °C, 8 h	57 °C @ 0.45 MPa	not published	^[18]
Elegoo	PLA Plus	PLA	200–230	35–65	1.30	45–55 °C, 8 h	56 °C @ 0.45 MPa	not published	^[19]
Elegoo	Rapid PLA Plus	PLA	200–230	35–65	1.23	45–55 °C, 8 h	57 °C @ 0.45 MPa	not published	^[20]
Elegoo	PLA Matte	PLA	190–230	35–65	1.26	45–55 °C, 8 h	55 °C @ 0.45 MPa	not published	^[21]
Elegoo	PLA Silk	PLA	190–230	35–65	1.25	45–55 °C, 8 h	54 °C @ 0.45 MPa	not published	^[22]
Elegoo	PETG Pro	PETG	230–260	65–75	1.27	55–65 °C, 8 h	73 °C @ 0.45 MPa	not published	^[23]
Elegoo	Rapid PETG	PETG	240–270	65–75	1.29	55–65 °C, 8 h	72 °C @ 0.45 MPa	not published	^[24]
Elegoo	ABS	ABS	240–280	90–100	1.05	65–75 °C, 8 h	85 °C @ 0.45 MPa	not published	^[25]
Elegoo	ASA	ASA	240–270	90–100	1.09	75–85 °C, 8 h	99 °C @ 0.45 MPa	not published	^[26]
Elegoo	TPU 95A	TPU	220–240	30–45	1.16	65–75 °C, 8 h	not published	not published	^[27]
Elegoo	PC	PC	250–270	90–110	1.20	75–85 °C, 8 h	109 °C @ 0.45 MPa	not published	^[28]
Elegoo	PAHT-CF	PA-CF	260–290	90–110	1.08	75–85 °C, 8 h	194 °C @ 0.45 MPa	not published	^[29]
eSUN	PLA+	PLA	210–230	45–60	1.23	not published	53 °C @ 0.45 MPa	not published	^[30]
eSUN	PLA-Basic	PLA	210–230	45–60	1.24	not published	not published	not published	^[30]
eSUN	PLA-Matte	PLA	190–230	45–60	1.33	not published	51 °C @ 0.45 MPa	not published	^[30]
eSUN	PLA-Silk	PLA	190–230	45–60	1.21	not published	50 °C @ 0.45 MPa	not published	^[30]
eSUN	PLA+HS	PLA	210–230	45–60	1.24	not published	54 °C @ 0.45 MPa	not published	^[30]
eSUN	PLA-CF	PLA-CF	190–230	45–60	1.21	not published	53 °C @ 0.45 MPa	not published	^[30]
eSUN	PETG	PETG	230–250	75–90	1.27	not published	64 °C @ 0.45 MPa	not published	^[30]
eSUN	PETG-Basic	PETG	240–270	75–90	1.27	not published	73 °C @ 0.45 MPa	not published	^[30]
eSUN	ABS+	ABS	230–270	95–110	1.06	not published	73 °C @ 0.45 MPa	not published	^[30]
eSUN	ASA+	ASA	240–270	90–110	1.00	not published	88 °C @ 0.45 MPa	not published	^[30]
eSUN	TPU-95A	TPU	220–250	45–60	1.21	not published	not published	not published	^[30]
eSUN	PA-CF	PA-CF	260–300	45–60	1.24	70 °C, ≥ 12 h	155 °C @ 0.45 MPa	not published	^[30]
Hatchbox	PLA	PLA	180–220	not published	1.27	not published	not published	not published	^{[31, 32]}
Hatchbox	PLA Pro+	PLA	190–220	not published	not published	not published	not published	not published	^[33]
Hatchbox	PLA Max V2	PLA	190–210	not published	not published	not published	not published	not published	^[34]
Hatchbox	Performance PLA (PPLA)	PLA	180–220	not published	not published	not published	not published	not published	^[35]
Hatchbox	Matte PLA	PLA	210–230	not published	not published	not published	not published	not published	^[36]
Hatchbox	Silk PLA	PLA	180–220	not published	not published	not published	not published	not published	^[37]
Hatchbox	Wood PLA	PLA	180–220	not published	not published	not published	not published	not published	^[38]
Hatchbox	PETG	PETG	230–260	not published	not published	not published	not published	not published	^[39]
Hatchbox	Rapid PETG	PETG	225–275	not published	not published	not published	not published	not published	^[40]
Hatchbox	ABS	ABS	210–240	not published	not published	not published	not published	not published	^[41]
Hatchbox	TPU 95A	TPU	190–235	not published	not published	not published	not published	not published	^[42]
Overture	PLA	PLA	190–220	25–60	1.21	50 °C, 7 h	not published	not published	^{[43, 44]}
Overture	PLA+	PLA	190–230	25–60	1.23	55 °C, 6 h	not published	not published	^[45]
Overture	Super PLA+	PLA	190–230	25–60	1.21	50 °C, 7 h	not published	not published	^{[46, 47]}
Overture	PLA Pro (PLA Professional)	PLA	190–220	25–60	1.27	50 °C, 7 h	not published	not published	^{[48, 49]}
Overture	Matte PLA	PLA	190–230	50–70	1.30	50 °C, 7 h	not published	not published	^{[50, 51]}
Overture	Silk PLA	PLA	200–220	50–60	1.19	50 °C, 7 h	not published	not published	^{[52, 53]}
Overture	Rock PLA	PLA	190–230	50–70	1.37	50 °C, 7 h	not published	not published	^{[54, 55]}
Overture	High Speed PETG	PETG	230–260	65–70	1.30	60 °C, 5 h	not published	not published	^[56]
Overture	ABS	ABS	245–265	80–100	1.15	75 °C, 7 h	98 °C	not published	^{[57, 58]}
Overture	ASA	ASA	240–270	70–95	1.14	75 °C, 7 h	not published	not published	^{[59, 60]}
Overture	TPU 95A	TPU	210–240	25–60	1.22	70 °C, 8 h	not published	not published	^[61]
Overture	PC Professional	PC	250–270	90–105	1.21	75 °C, 7 h	not published	not published	^{[62, 63]}
Overture	Easy Nylon	PA (nylon)	245–260	50	1.12	95 °C, 7 h	not published	not published	^{[64, 65]}
Polymaker	PolyLite PLA	PLA	190–230	25–60	1.17	55 °C, 6 h	60 °C @ 0.45 MPa 58 °C @ 1.8 MPa	15	^{[66, 67]}
Polymaker	PLA Pro	PLA	210–230	30–60	1.24	55 °C, 6 h	58.1 °C @ 0.45 MPa 55.6 °C @ 1.8 MPa	22	^{[67, 68]}
Polymaker	PolySonic PLA	PLA	190–230	30–60	1.23	55 °C, 6 h	53 °C @ 0.45 MPa 52 °C @ 1.8 MPa	24	^{[67, 69]}
Polymaker	Panchroma Matte PLA	PLA	190–230	25–60	1.37	55 °C, 6 h	not published	not published	^[70]
Polymaker	Panchroma Silk PLA	PLA	190–230	25–60	1.24	55 °C, 6 h	not published	not published	^[70]
Polymaker	PETG	PETG	240–260	60–70	1.30	60 °C, 6 h	69 °C @ 0.45 MPa 65 °C @ 1.8 MPa	not published	^[71]
Polymaker	PolyLite ABS	ABS	245–265	90–100	1.04	70 °C, 6 h	100 °C @ 0.45 MPa 98 °C @ 1.8 MPa	not published	^[72]
Polymaker	ASA	ASA	230–260	75–95	1.13	70 °C, 7 h	103 °C @ 0.45 MPa 100 °C @ 1.8 MPa	not published	^[73]
Polymaker	PolyFlex TPU95	TPU	210–230	25–60	not published	70 °C, 8 h	not published	not published	^[74]
Polymaker	PolyMide CoPA	PA (nylon)	250–270	25–50	1.12	100 °C, 8 h	111 °C @ 0.45 MPa 70 °C @ 1.8 MPa	not published	^[75]
Polymaker	PolyMax PC	PC	250–270	90–105	1.19	75 °C, 6 h	114 °C @ 0.45 MPa 99 °C @ 1.8 MPa	not published	^[76]
Polymaker	Fiberon PA6-CF20	PA-CF	280–300	40–50	1.17	100 °C, 10 h	215 °C @ 0.45 MPa 173 °C @ 1.8 MPa	not published	^[77]
Polymaker	Fiberon PETG-rCF08	PETG-CF	240–270	60–70	1.30	65 °C, 3 h	68.6 °C @ 0.45 MPa 65.7 °C @ 1.8 MPa	not published	^[78]
Polymaker	PolyDissolve S1 (PVA)	PVA	215–225	25–60	1.13	80 °C, 12 h	not published	8	^{[67, 79]}
Prusament	PLA	PLA	200–220	40–60	1.24	45 °C, 6 h	55 °C @ 0.45 MPa 55 °C @ 1.8 MPa	not published	^{[80, 81]}
Prusament	PLA Blend	PLA	200–220	40–60	1.24	not published	55 °C @ 0.45 MPa 52.5 °C @ 1.8 MPa	not published	^[82]
Prusament	PLA High Speed	PLA	190–230	40–60	1.24	not published	57 °C @ 0.45 MPa 55 °C @ 1.8 MPa	not published	^[83]
Prusament	rPLA Natural Pigments	PLA	195–215	40–60	1.24	45 °C, 6 h	61 °C @ 0.45 MPa 59 °C @ 1.8 MPa	not published	^{[81, 84]}
Prusament	PETG	PETG	240–260	70–90	1.27	55 °C, 6 h	68 °C @ 0.45 MPa 68 °C @ 1.8 MPa	not published	^{[81, 85]}
Prusament	PETG Carbon Fiber	PETG-CF	255–275	80–100	1.27	55 °C, 6 h	96 °C @ 0.45 MPa 80 °C @ 1.8 MPa	not published	^{[81, 86]}
Prusament	ASA	ASA	250–270	105–115	1.07	80 °C, 4 h	93 °C @ 0.45 MPa 86 °C @ 1.8 MPa	not published	^{[81, 87]}
Prusament	PC Blend	PC	265–285	100–120	1.22	85 °C, 5 h	113 °C @ 0.45 MPa 93 °C @ 1.8 MPa	not published	^{[81, 88]}
Prusament	PC Blend Carbon Fiber	PC-CF	275–295	100–120	1.22	90 °C, 4 h	114 °C @ 0.45 MPa 106 °C @ 1.8 MPa	not published	^{[81, 89]}
Prusament	PA11 Carbon Fiber	PA-CF	280–290	100–120	1.11	90 °C, 6 h	192 °C @ 0.45 MPa 152 °C @ 1.8 MPa	not published	^{[81, 90]}
Prusament	PA11	PA (nylon)	265–285	90–110	1.02	not published	58.7 °C @ 0.45 MPa 49.9 °C @ 1.8 MPa	10	^[91]
Prusament	PVB	Other	205–225	70–80	1.10	45 °C, 8 h	63 °C @ 0.45 MPa 58 °C @ 1.8 MPa	not published	^{[81, 92]}
Prusament	TPU 95A	TPU	220–240	55–75	1.25	60 °C, 4–6 h	78.6 °C @ 1.8 MPa	not published	^{[81, 93]}
Siraya Tech	Fibreheart PET-CF	PET-CF	280–320	60–80	1.30	90 °C, 4–6 h	86.7 °C @ 0.45 MPa 76.6 °C @ 1.8 MPa	20	^[94]
Siraya Tech	Fibreheart PETG-CF Pro	PETG-CF	250–270	70–80	1.30	70–80 °C, 4–6 h	75 °C @ 0.45 MPa 69 °C @ 1.8 MPa	25	^{[95, 96]}
Siraya Tech	Fibreheart PET-GF	PET-GF	300	80	1.30	100–120 °C, 4–6 h	78 °C @ 0.45 MPa 74 °C @ 1.8 MPa	not published	^[97]
Siraya Tech	Fibreheart PPA	PA (nylon)	280–300	70–80	1.21	80–100 °C, 4–6 h	81 °C @ 0.45 MPa 73.5 °C @ 1.8 MPa	not published	^[98]
Siraya Tech	Fibreheart PPA-CF	PA-CF	280–320	70–90	1.20	100 °C, 4–6 h	84.5 °C @ 0.45 MPa 82.5 °C @ 1.8 MPa	12	^[99]
Siraya Tech	Fibreheart PPA-CF Core	PA-CF	280–320	80	1.23	80–100 °C, 4–6 h	97 °C @ 0.45 MPa 84 °C @ 1.8 MPa	not published	^[100]
Siraya Tech	Fibreheart ABS-CF	ABS-CF	250–270	100–110	1.06	70–80 °C, 4–6 h	99 °C @ 0.45 MPa 94 °C @ 1.8 MPa	not published	^[101]
Siraya Tech	Fibreheart ABS-GF	ABS-GF	250–270	100–110	1.08	65 °C, 4–6 h	93 °C 97 °C	not published	^[102]
Siraya Tech	Fibreheart ASA-GF	ASA-GF	250–270	100–110	1.10	70–80 °C, 4–6 h	98 °C @ 0.45 MPa 94 °C @ 1.8 MPa	not published	^[103]
Siraya Tech	Fibreheart ABS HT HF	ABS	240–260	100–110	1.05	70–80 °C, 4–6 h	101 °C @ 0.45 MPa 99 °C @ 1.8 MPa	not published	^[104]
Siraya Tech	Flex TPU 95A	TPU	200–230	20–50	1.16	50–65 °C, 4–6 h	not published	not published	^[105]
Siraya Tech	Flex TPU 64D	TPU	240–270	45	1.23	50–60 °C, 4–6 h	not published	not published	^[106]
Siraya Tech	Rebound PEBA 95A	Other	230–260	60–100	1.00	50–60 °C, 4–6 h	not published	not published	^[107]
Sunlu	PLA	PLA	200–240	60–70	1.23	50–55 °C, 6–8 h	55 °C @ 0.45 MPa	not published	^{[108, 109]}
Sunlu	PLA+	PLA	205–245	50–60	1.21	50–55 °C, 6–8 h	56 °C @ 0.45 MPa	not published	^{[109, 110]}
Sunlu	PLA+ 2.0	PLA	205–245	50–60	1.21	50–55 °C, 6–8 h	56 °C @ 0.45 MPa	not published	^{[109, 111]}
Sunlu	High Speed PLA	PLA	210–230	50–60	1.28	50–55 °C, 6–8 h	57 °C @ 0.45 MPa	not published	^{[109, 112]}
Sunlu	PLA Matte	PLA	205–245	50–60	1.31	50–55 °C, 6–8 h	55 °C @ 0.45 MPa	not published	^{[109, 113]}
Sunlu	Silk PLA+	PLA	210–230	50–60	1.23	50–55 °C, 6–8 h	57 °C @ 0.45 MPa	not published	^{[109, 114]}
Sunlu	PETG	PETG	240–260	60–70	1.27	60–65 °C, 6–8 h	70 °C @ 0.45 MPa	not published	^{[109, 115]}
Sunlu	ABS	ABS	250–290	80–100	1.02	75–85 °C, 6–8 h	95 °C @ 0.45 MPa	not published	^{[109, 116]}
Sunlu	ASA	ASA	250–280	80–100	1.04	80 °C, 6–8 h	101 °C @ 0.45 MPa	not published	^{[109, 117]}
Sunlu	TPU 95A	TPU	190–230	50–60	1.21	50–60 °C, 6–8 h	not published	not published	^{[109, 118]}
Sunlu	PC	PC	260–280	100–110	1.15	70–80 °C, 6–8 h	101 °C @ 0.45 MPa	not published	^{[109, 119]}
Sunlu	Easy PA	PA (nylon)	250–280	30–50	1.10	80–110 °C, 4–12 h	119 °C @ 0.45 MPa	not published	^{[109, 120]}

Brand pages

Brands that publish enough for a page of their own: how their data sheets are laid out, which test standards they use, and what stands out across their line-up.

Bambu Lab filament data sheets: temperatures, drying and test values
What Bambu Lab's filament TDS sheets list, the ISO tests behind them, and where the wiki and product pages give different numbers.
Elegoo filament specs: the product-page tables, X-Y vs Z strength and drying
Nozzle, bed, chamber, drying, HDT, Vicat and X-Y/Z tensile data for 12 Elegoo filaments, from Elegoo product pages and the Elegoo Wiki drying guide.
eSUN filament specs: what the official store's comparison tool lists
Extruder and bed temperatures, density, 0.45 MPa HDT, fan and print speed for 12 eSUN filaments, from the comparison tool on eSUN's official store.
Overture filament specs: data sheets, Specs tabs and where they disagree
Nozzle, bed, density, Vicat, tensile and drying data for 13 Overture filaments, from Overture's TDS PDFs and product-page Specs tabs.
Polymaker filament specs: reading PolyLite, Panchroma and Fiberon data sheets
Temperatures, drying, annealing, HDT, Vicat, X-Y and Z tensile and max volumetric speed for 14 Polymaker filaments, from TDS PDFs and the Polymaker Wiki.
Prusament filament data: print settings and printed-specimen tests from Prusa Polymers
Nozzle, bed, HDT, density and drying data for 13 Prusament filaments, taken from Prusa Polymers datasheets and the Prusa Knowledge Base.
Siraya Tech filament data: Fibreheart composites, flexibles and annealed HDT
Print settings, drying, HDT, Vicat and density for 13 Siraya Tech filaments, taken from the HTML technical data sheets on siraya.tech.
Sunlu filament data: ISO data sheets, speed-banded temperatures and wiki drying times
Print settings, ISO 75 HDT, Vicat, density and drying for 12 Sunlu filaments, from Sunlu technical data sheets and the Sunlu wiki comparison table.

Using the numbers

Turn a published maximum flow into a speed limit for your layer height and line width with thevolumetric speed calculator.
Convert grams left on a spool to metres with the length and weight calculator; it uses the densities in this table.
Plan which spools can share a dryer run with the drying planner, which reads the drying conditions listed here.

Sources

Bambu PLA Basic Technical Data Sheet (V3.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu High Flow Hotend (H2/P2S/X2D) product page. Bambu Lab. Product page. Max volumetric speed table for PLA Basic, PLA Matte and PETG HF with standard-flow and high-flow 0.4/0.6/0.8 mm hotends. Accessed October 12, 2026.
Bambu PLA Matte Technical Data Sheet (V3.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu PLA Silk+ Technical Data Sheet (V1.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu PLA Tough+ Technical Data Sheet (V3.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu PLA-CF Technical Data Sheet (V2.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu PETG Basic Technical Data Sheet (V3.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu PETG HF Technical Data Sheet (V1.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu PETG-CF Technical Data Sheet (V3.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu ABS Technical Data Sheet (V3.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu ASA Technical Data Sheet (V3.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu TPU 95A HF Technical Data Sheet (V1.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
TPU 95A HF product page. Bambu Lab. Product page. Max volumetric speed and print speed of TPU 95A HF vs. Bambu TPU 95A at 230 °C. Accessed October 12, 2026.
Bambu PAHT-CF Technical Data Sheet (V3.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu PC Technical Data Sheet (V2.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu Support for PLA/PETG Technical Data Sheet (V1.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
Bambu PVA Technical Data Sheet (V1.0). Bambu Lab. Technical data sheet. Recommended printing settings, drying, physical, thermal and mechanical properties. Accessed October 12, 2026.
ELEGOO PLA product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO PLA Plus product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO Rapid PLA Plus product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO PLA Matte product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO PLA Silk product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO PETG Pro product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO Rapid PETG product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO ABS product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO ASA product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO TPU 95A product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO PC product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
ELEGOO PAHT-CF product page: Specifications. ELEGOO. Product page. Specifications section: drying, recommended printing settings, physical properties (density, Vicat, HDT at 0.45 MPa) and X-Y/Z mechanical properties; no test standards named. Accessed October 12, 2026.
Product Comparison. eSUN (official store). Product page. Values appear after choosing a product in the comparison tool: density, HDT at 0.45 MPa, melt flow index, Z tensile strength, X-Y flexural and Izod values, extruder and bed temperature, fan, print speed, build surfaces and printing recommendations; no test standards named. Accessed October 12, 2026.
Black PLA Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 180–220 °C; no heated bed required; ±0.03 mm. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
HATCHBOX PLA 3D Printer Filament Safety Data Sheet (Version 1.0, issued 1/11/2016). HATCHBOX. Safety data sheet. Section 9: melting temperature 155 °C, density 1.27 g/cm³; section 10: thermal decomposition above 260 °C. Accessed October 12, 2026.
Black PLA Pro+ Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 190–220 °C. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
White PLA Max V2 Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 190–210 °C; AMS-compatible spool size. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
Orange Performance PLA Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 180–220 °C; matte finish. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
White Matte PLA Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 210–230 °C. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
Silk White PLA Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 180–220 °C. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
Wood PLA Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 180–220 °C. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
White PETG Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 230–260 °C; no heated bed required. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
Black Rapid PETG Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 225–275 °C; print speeds up to 400 mm/s. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
Black ABS Filament - 1.75mm, 1kg Spool. HATCHBOX. Product page. Print temperature 210–240 °C. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
Black TPU Filament - 1.75mm, 1kg Spool (Shore 95A). HATCHBOX. Product page. Print temperature 190–235 °C. Page text read via the store's public /products/<handle>.js endpoint; the HTML page returns 403 to automated requests. Accessed October 12, 2026.
OVERTURE PLA Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions, physical and mechanical properties of 3D-printed specimens (100% infill). Accessed October 12, 2026.
Overture High Speed PLA 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting (50 °C, 7 h) and 'Up to 300mm/s' print speed; links the OVERTURE PLA TDS. Accessed October 12, 2026.
OVERTURE PLA+ Technical Data Sheet (Version 5.2, Jan 2026). Overture 3D. Technical data sheet. Recommended printing conditions including drying, physical properties and X-Y/Z mechanical properties of printed specimens. Accessed October 12, 2026.
OVERTURE SUPER PLA+ Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions, physical and mechanical properties of 3D-printed specimens (100% infill). Accessed October 12, 2026.
Overture Super PLA+ 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting; positioning versus PLA Pro. Accessed October 12, 2026.
OVERTURE PLA PROFESSIONAL Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions, physical and mechanical properties of 3D-printed specimens (100% infill). Accessed October 12, 2026.
Overture PLA Pro 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting. Accessed October 12, 2026.
OVERTURE MATTE PLA Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions and printed-specimen properties; also lists a carbon fiber variant. Accessed October 12, 2026.
Overture Matte PLA 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting. Accessed October 12, 2026.
OVERTURE SILK PLA Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions, physical and mechanical properties of 3D-printed specimens (100% infill). Accessed October 12, 2026.
Overture Silk PLA 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting; description gives a different nozzle range. Accessed October 12, 2026.
OVERTURE Rock PLA Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions, physical and mechanical properties of 3D-printed specimens (100% infill). Accessed October 12, 2026.
Overture Rock PLA 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting. Accessed October 12, 2026.
OVERTURE PETG Technical Data Sheet (Version 5.2, Dec 2025). Overture 3D. Technical data sheet. Recommended printing conditions including drying, physical properties and X-Y/Z mechanical properties of printed specimens; linked from the High Speed PETG page. Accessed October 12, 2026.
OVERTURE ABS Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions, physical and mechanical properties of 3D-printed specimens (100% infill). Accessed October 12, 2026.
Overture ABS 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting; description states heat deflection up to 98 °C and different nozzle/bed settings. Accessed October 12, 2026.
OVERTURE ASA Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions, physical and mechanical properties of 3D-printed specimens (100% infill). Accessed October 12, 2026.
Overture ASA 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting. Accessed October 12, 2026.
OVERTURE TPU 2.0 Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Linked as the TDS of the TPU 95A product; recommended printing conditions including drying, physical and mechanical properties. Accessed October 12, 2026.
OVERTURE PC PROFESSIONAL Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions; separate property tables for transparent and other colors. Accessed October 12, 2026.
Overture PC Professional 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting; description gives different bed and drying settings. Accessed October 12, 2026.
OVERTURE EASY NYLON Technical Data Sheet (Version 5.1, August 2024). Overture 3D. Technical data sheet. Recommended printing conditions; dry-state and wet-state mechanical properties. Accessed October 12, 2026.
Overture Easy Nylon 3D Printer Filament 1.75mm (product page). Overture 3D. Product page. Specs tab drying setting; heat resistance claim of up to 180 °C. Accessed October 12, 2026.
PolyLite PLA Technical Data Sheet (V5.4). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying. Accessed October 12, 2026.
Polymaker Material Print Tips. Polymaker Wiki. Manufacturer documentation. Per-product print tips, including recommended maximum volumetric speeds. Accessed October 12, 2026.
Polymaker PLA Pro Technical Data Sheet (V6.0, 2026-01-26). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying; specimens printed on a Bambu Lab P1S. Accessed October 12, 2026.
PolySonic PLA Technical Data Sheet (V6.0, 2026-06-08). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying; mechanical data at classic and high print speed. Accessed October 12, 2026.
Panchroma Product Data Sheet (V2.1). Polymaker. Technical data sheet. One data table for the Panchroma range by finish (Basic, CoPE, Matte, Satin, Silk, Others): density, Vicat, tensile, impact, temperatures, speed, drying. Accessed October 12, 2026.
Polymaker PETG Technical Data Sheet (V3.0). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying. Accessed October 12, 2026.
PolyLite ABS Technical Data Sheet (V5.5). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying; file name says V5.4, cover says V5.5. Accessed October 12, 2026.
Polymaker ASA Technical Data Sheet (V6.0). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying; values based on PolyLite ASA (SKU PF01046). Accessed October 12, 2026.
PolyFlex TPU95 Technical Data Sheet (V5.4). Polymaker. Technical data sheet. Physical properties, ISO 37 elastomer tensile data, Shore hardness, recommended printing conditions incl. drying. Accessed October 12, 2026.
PolyMide CoPA Technical Data Sheet (V5.4). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying; dry and wet mechanical properties; annealing. Accessed October 12, 2026.
PolyMax PC Technical Data Sheet (V5.4). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying; annealing. Accessed October 12, 2026.
Fiberon PA6-CF20 Technical Data Sheet (V1.1). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying; dry and wet mechanical properties; annealing; shrinkage. Accessed October 12, 2026.
Fiberon PETG-rCF08 Technical Data Sheet (V1.0). Polymaker. Technical data sheet. Physical, thermal and mechanical properties of printed specimens; recommended printing conditions incl. drying. Accessed October 12, 2026.
PolyDissolve S1 Technical Data Sheet (V5.4). Polymaker. Technical data sheet. Physical properties, material compatibility table, recommended printing conditions incl. drying. Accessed October 12, 2026.
Prusament PLA Technical Datasheet (v1.1, 27-07-2022). Prusa Polymers. Technical data sheet. ZIP archive linked as the PLA tech sheet on prusament.com; English Prusament PLA PDF. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Drying filament. Prusa Knowledge Base. Manufacturer documentation. Drying temperature and time table for Prusament materials; spool temperature limits. Accessed October 12, 2026.
Prusament PLA Blend Technical Datasheet (v1.0, 27-07-2022). Prusa Polymers. Technical data sheet. Same ZIP archive as the PLA datasheet; English Prusament PLA Blend PDF. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Prusament PLA High Speed Technical Datasheet (v1.0, 17-06-2026). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens; tensile strength anisotropy coefficient. Accessed October 12, 2026.
Prusament rPLA Natural Pigments Technical Datasheet (v1.0, 21-11-2023). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Prusament PETG Technical Datasheet (v1.1, 16-02-2022). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Prusament PETG Carbon Fiber Black Technical Datasheet (v1.0, 20-12-2022). Prusa Polymers. Technical data sheet. ZIP archive linked as the tech sheet on prusament.com; English PDF. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Prusament ASA Technical Datasheet (v1.1, 20-05-2024). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Prusament PC Blend Technical Datasheet (v1.1, 16-02-2022). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Prusament PC Blend Carbon Fiber Technical Datasheet (v2.0-OY, 19-04-2023). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Prusament PA11 Carbon Fiber Technical Datasheet (v1.0, 29-06-2022). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens. Accessed October 12, 2026.
Prusament PA11 Technical Datasheet (v1.0, 22-07-2026). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens; chamber temperature and maximum volumetric speed. Accessed October 12, 2026.
Prusament PVB Technical Datasheet (v1.1, 16-02-2022). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens; maximum drying temperature. Accessed October 12, 2026.
Prusament TPU 95A Technical Datasheet (v1.0, 29-05-2025). Prusa Polymers. Technical data sheet. Recommended print settings, typical material properties and mechanical properties of printed test specimens; Vicat A, compression set, abrasion. Accessed October 12, 2026.
Siraya Tech Fibreheart PET-CF TDS. Siraya Tech. Technical data sheet. Print settings, drying, unannealed and annealed property data, max extrusion volumetric speed. Accessed October 12, 2026.
Fibreheart PETG-CF Pro TDS. Siraya Tech. Technical data sheet. Print settings, drying, property data with test methods. Accessed October 12, 2026.
Fibreheart PETG-CF Pro Filament (product page). Siraya Tech. Product page. Flow rate up to 25 mm³/s; HDT 76 °C claim; product specifications. Accessed October 12, 2026.
Fibreheart PET-GF TDS. Siraya Tech. Technical data sheet. Print settings, drying, unannealed and annealed property data, annealing procedure. Accessed October 12, 2026.
Siraya Tech Fibreheart PPA TDS. Siraya Tech. Technical data sheet. Print settings, drying, dry and wet HDT, property data. Accessed October 12, 2026.
Siraya Tech Fibreheart PPA-CF TDS. Siraya Tech. Technical data sheet. Print settings, drying, unannealed and annealed property data, max extrusion volumetric speed. Accessed October 12, 2026.
Siraya Tech Fibreheart PPA-CF Core TDS. Siraya Tech. Technical data sheet. Print settings, drying, unannealed and annealed property data. Accessed October 12, 2026.
Siraya Tech Fibreheart ABS-CF TDS. Siraya Tech. Technical data sheet. Print settings, chamber temperature, drying, property data. Accessed October 12, 2026.
Fibreheart ABS-GF Filament TDS. Siraya Tech. Technical data sheet. Print settings, drying, property data. Accessed October 12, 2026.
Siraya Tech Fibreheart ASA-GF TDS. Siraya Tech. Technical data sheet. Print settings, chamber temperature, drying, property data. Accessed October 12, 2026.
Fibreheart ABS HT HF Filament TDS. Siraya Tech. Technical data sheet. Print settings, chamber temperature, drying, property data. Accessed October 12, 2026.
Siraya Tech Fibreheart Flex TPU 95A TDS. Siraya Tech. Technical data sheet. Print settings, drying, property data, biocompatibility testing. Accessed October 12, 2026.
Flex TPU 64D Filament TDS. Siraya Tech. Technical data sheet. Print settings, drying, AMS compatibility, property data. Accessed October 12, 2026.
Siraya Tech Rebound PEBA 95A TDS. Siraya Tech. Technical data sheet. Print settings, drying, property data. Accessed October 12, 2026.
SUNLU PLA Technical Data Sheet (SL-TE-WI-077, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
Material Performance Comparison. SUNLU Wiki. Manufacturer documentation. Detailed specification table for the SUNLU line, including drying temperature and drying time per product. Accessed October 12, 2026.
SUNLU PLA+ Technical Data Sheet (SL-TE-WI-080, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU PLA+2.0 Technical Data Sheet (SL-TE-WI-081, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU High Speed PLA Technical Data Sheet (SL-TE-WI-064, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU PLA Matte Technical Data Sheet (SL-TE-WI-084, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU Silk PLA+ Technical Data Sheet (SL-TE-WI-067, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU PETG Technical Data Sheet (SL-TE-WI-074, version A/1, Chinese/English). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU ABS Technical Data Sheet (SL-TE-WI-068, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU ASA Technical Data Sheet (SL-TE-WI-059, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU TPU 95A Technical Data Sheet (SL-TE-WI-088, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU PC Technical Data Sheet (SL-TE-WI-126, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.
SUNLU Easy PA Technical Data Sheet (SL-TE-WI-060, version A/1). SUNLU. Technical data sheet. Recommended printing parameters with drying temperature; ISO 75 HDT at 0.45 MPa, ISO 306 Vicat, ISO 1183 density and ISO 527-2 X-Y tensile results from printed specimens. Accessed October 12, 2026.